Sikagard®-6060 - Underbody coating 1L
Sikagard®-6060 - Underbody coating 1L
15.01€

Sikagard®-6060 - Underbody coating 1L

   0 reviews
Product Code:
Availability:
Sikagard®-6060
In Stock
15.01€
Ex Tax: 12.20€

Sikagard®-6060 is a durable, thixotropic, bitumen-based protective coating with very good rust-proofing and sound deadening properties. It is suitable for an effective vehicle underbody protection. The product can be sprayed haze free without any cob webbing and does not drip.
Sikagard®-6060 shows good adhesion on different paints, metal primers, metals and PVC without the need for pretreatment. A tough coating remains after drying, protecting metal from corrosion.  

      PRODUCT BENEFITS

      Outstanding application properties (no running or dripping)

      Good adhesion performance to a wide variety of substrates

      Excellent acoustic and sound damping properties

      Fast drying

      Road salt resistant

      High solid content



      APPLICATION

      Surface preparation

      Surfaces must be clean, dry and free of rust, dust and grease. Bare metal must be pre-­treated to enhance corrosion resistance (e.g. uncoated steel, etc).

      Application

      Sikagard®-6060 can be applied by light airless spray equipments or by air-mix guns with an air pressure of approx. 3 - 6 bar. Use either the Sika® SCP Gun (pressure cup type) or the Sika® UBC Gun (vacuum type) to apply the product.

      Shake can approx. 40 times before use. Cover adjacent surfaces prior the spray process. Spray at room temperature and from a distance of approx. 25 cm in an grid motion to build up a continuous coat.
      Sikagard®-6060 can be applied without dripping. If a thick layer is required, let layers dry in between. A wide variety of texture can be achieved by altering the spay technique.

      Do not spray on parts of the brake, engine or exhaust system.

      Removal

      Uncured Sikagard®-6060 can be removed from tools and equipment with Sika® Remover-208 or another suitable solvent. Once dried, the material can only be removed mechanically. Hands and exposed skin shall be washed immediately using hand wipes such as Sika® Cleaner-350H or a suitable industrial hand cleaner and water.

      Do not use solvents on skin.

      Overpainting

      Sikagard®-6060 cannot be overpainted.

      Reviews (0)

         0 reviews
      Write a review
      Tags: sikagard, SIKA,