Sika gard 6440 - Rubberized Underbody coating 1L

Name: Sika gard 6440 - Rubberized Underbody coating 1L
Price: 14.99€
Availability: InStock

0 reviews

Product Code:
Availability:

Sikagard®-6440 - Underbody coating 1L
In Stock

14.99€
Ex Tax: 12.19€

Available Options

Sika Gard 6440 Color

Black

Gray

Add to Wish List Compare this Product

SikaGard®-6440 is a durable, thixotropic, rubber-based protective coating with very good rust-proofing and sound deadening properties. It is suitable for an effective underbody and stone chip protection to the vehicle body and convinces with its excellent final performance. Original texture can easily be reproduced.
SikaGard®-6440 shows a good over paintability performance.
A tough coating remains after drying, protecting metal from impact and corrosion.

Easy applicaton with no running or dripping
Good abrasion, impact and road salt resistance
Various finishes achievable

Application

Surface Preparation

Surfaces must be clean, dry and free of rust, dust and grease. Bare metal must be pre-treated to enhance corrosion resistance (e.g. uncoated steel, etc).

Application

SikaGard®-6440 can be applied by air-mix guns with an air pressure of 3 - 6 bar. Use either the Sika® SCP Gun (pressure cup type) or the Sika® UBC Gun (vacuum type) to apply the product.

Shake the can approx. 40 times before use. Cover adjacent surfaces prior the spray process. Spray at room temperature and from a distance of approx. 25 cm in an grid motion to build up a continuous coat.

SikaGard®-6440 can be applied without dripping. Apply this product until the desired layer thickness is reached. If a thick layer is required, let layers dry in between. A wide variety of textures can be achieved by altering the spray technique. Do not spray on parts of the brake, engine or exhaust system.

Removal

Uncured SikaGard®-6440 can be removed from tools and equipment with Sika® Remover-208 or another suitable solvent. Once dried, the material can only be removed mechanically. Hands and exposed skin shall be washed immediately using hand wipes such as Sika® Cleaner-350H or a suitable industrial hand cleaner and water.

Do not use solvents on skin.

Overpainting

SikaGard®-6440 is over paintable in a dry state (after 24 hours) with commonly used conventional paint systems. Waiting time can be reduced by accelerated drying at max. 60°C. Due to the wide range of paints adhesion and compatibility tests are necessary.